Difference between revisions of "Comments:Slope Tool"

From GeoGebra Manual
Jump to: navigation, search
m (Text replace - "[[nb:" to "[[no:")
m (Updated tool names)
Line 1: Line 1:
<!-- DO NOT EDIT -->{{:Manual:{{PAGENAME}}}}<!-- END: DO NOT EDIT -->
 
 
==Position of the slope triangle==
 
==Position of the slope triangle==
For a line defined by points ''A'' and ''B'' (in this order) using [[Line through Two Points Tool]] or [[Line Command]], the slope triangle is placed to point ''A''. For line ''l'' defined using input line (entered as equation, e.g. <code>l:x+2y=3</code>), the triangle is placed at the y-intercept (point on ''l'' with zero x-coordinate).
+
For a line defined by points ''A'' and ''B'' (in this order) using [[Line Tool]] or [[Line Command]], the slope triangle is placed to point ''A''. For line ''l'' defined using input line (entered as equation, e.g. <code>l:x+2y=3</code>), the triangle is placed at the y-intercept (point on ''l'' with zero x-coordinate).
 
 
 
If you want to place the triangle elsewhere, you can follow these instructions.
 
If you want to place the triangle elsewhere, you can follow these instructions.
 
+
{{step|num=1}}select [[Line Tool]], click the line ''l'' in two points to create points ''C'' and ''D''; new line will be created at the same time
{{step|num=1}}select [[Line through Two Points Tool]], click the line ''l'' in two points to create points ''C'' and ''D''; new line will be created at the same time
 
 
 
 
{{step|num=2}}use ''Slope Tool'' on  the newly created line
 
{{step|num=2}}use ''Slope Tool'' on  the newly created line
 
 
{{step|num=3}}hide point ''D''
 
{{step|num=3}}hide point ''D''
 
 
{{step|num=4}}move ''C'' to adjust position of the slope triangle
 
{{step|num=4}}move ''C'' to adjust position of the slope triangle
  
[[bs:Nagib Alat]]
 
[[ca:Eina Pendent]]
 
[[cs:Nástroj Spád]]
 
[[da:Hældning værktøj]]
 
[[de:Steigung (Werkzeug)]]
 
[[es:Herramienta de Pendiente]]
 
[[et:Tõus tööriist]]
 
[[fa:شیب ابزار]]
 
[[fr:Outil Pente]]
 
[[hr:Nagib alat]]
 
[[it:Strumento Pendenza]]
 
[[kk:Бұрыштық коэффициент құралы]]
 
[[ko:기울기 도구]]
 
[[lt:Posvyris įrankis]]
 
[[mk:Наклон Алатка]]
 
[[no:Stigning Verktøy]]
 
[[pl:Nachylenie Narzędzie]]
 
[[sk:Smernica nástroj]]
 
[[sv:Lutning-verktyget]]
 
[[tr:Eğim Araç]]
 
[[zh:計算斜率 工具]]
 
 
[[hu:Meredekség eszköz]]
 
 
[[no:Stigning Verktøy]]
 
[[nn:Stigning Verktøy]]
 

Revision as of 00:48, 27 November 2013

Position of the slope triangle

For a line defined by points A and B (in this order) using Line Tool or Line Command, the slope triangle is placed to point A. For line l defined using input line (entered as equation, e.g. l:x+2y=3), the triangle is placed at the y-intercept (point on l with zero x-coordinate). If you want to place the triangle elsewhere, you can follow these instructions. 1 select Line Tool, click the line l in two points to create points C and D; new line will be created at the same time 2 use Slope Tool on the newly created line 3 hide point D 4 move C to adjust position of the slope triangle

© 2020 International GeoGebra Institute