꼭짓점 명령

이 페이지는 공식 매뉴얼에서 출력과 pdf를 위한 부분입니다. 일반 사용자들은 이 페이지를 편집할 수 없습니다. 만일 이 페이지에서 오류를 발견하였으면, 연락하여 주시기 바랍니다.사용자에 의해 편집 가능한 버전으로 이동

Corner( <Number of Corner> ): For number n = 1, 2, 3, 4 creates a point at the corner of the Graphics View, for n = 5 returns point (w, h), where w and h are width and height of the Graphics View in pixels. Always uses first Graphics View, even if second is active.; 노트: Corner( <Number of Corner> ) won't work inside other commands. Instead create eg C_1 = Corner(1) and use that.
Corner( <Graphics View>, <Number of Corner> ): Creates a point at the corner of Graphics View (1, 2) which is never visible in that view. Supported values of number n are 1, 2, 3, 4 and 5 as above.; 노트: Corner( <Graphics View>, <Number of Corner> ) won't work inside other commands. Instead create eg C_1 = Corner(1, 1) and use that.; 노트: use -1 for the 3D Graphics View's corners (available values for Number: from 1 to 8); for n = 9 returns point (w, h, 0), where w and h are width and height of the Graphics View in pixels; for n = 10 returns point (w, h, 0), where w and h are width and height of the main window in pixels; for n = 11 returns view direction (for parallel projections) or eye position (for e.g. perspective projection); for n = 12 returns screen left-to-right direction; for n = 13 returns scales for x, y, z axes.

Corner( <Image>, <Number of Corner> ): Creates a point at the corner of the image (number n = 1, 2, 3, 4).

Corner( <Text>, <Number of Corner> ): Creates a point at the corner of the text (number n = 1, 2, 3, 4).; 노트: Corner( <Text>, <Number of Corner> ) won't work inside the Sequence or Zip commands. Also the Absolute Position on Screen property must be unchecked

노트: The numbering of the corners is counter‐clockwise and starts at the lower left corner.