Difference between revisions of "Comments:Slope Tool"

From GeoGebra Manual
Jump to: navigation, search
Line 1: Line 1:
 
<!-- DO NOT EDIT -->{{:Manual:{{PAGENAME}}}}<!-- END: DO NOT EDIT -->
 
<!-- DO NOT EDIT -->{{:Manual:{{PAGENAME}}}}<!-- END: DO NOT EDIT -->
 
==Position of the slope triangle==
 
==Position of the slope triangle==
For a line defined by points ''A'' and ''B'' (in this order) using [[Line Tool]] or [[Line Command]], the slope triangle is placed to point ''A''. For line ''l'' defined using input line (entered as equation, e.g. <code>l:x+2y=3</code>), the triangle is placed at the y-intercept.
+
For a line defined by points ''A'' and ''B'' (in this order) using [[Line through Two Points Tool]] or [[Line Command]], the slope triangle is placed to point ''A''. For line ''l'' defined using input line (entered as equation, e.g. <code>l:x+2y=3</code>), the triangle is placed at the y-intercept.
  
 
If you want to place the triangle elsewhere, you can follow these instructions.
 
If you want to place the triangle elsewhere, you can follow these instructions.
{{step|number=1}}select [[Line Tool]], click the line ''l'' in two points to create points ''C'' and ''D''; new line will be created at the same time
+
 
{{step|number=2}}use ''Slope Tool'' on  the newly created line
+
{{step|num=1}}select [[Line through Two Points Tool]], click the line ''l'' in two points to create points ''C'' and ''D''; new line will be created at the same time
{{step|number=3}}hide point ''D''
+
 
 +
{{step|num=2}}use ''Slope Tool'' on  the newly created line
 +
 
 +
{{step|num=3}}hide point ''D''
 +
 
 +
{{step|num=4}}move ''C'' to adjust position of the slope triangle
  
 
[[bs:Nagib Alat]]
 
[[bs:Nagib Alat]]

Revision as of 03:34, 13 January 2012

Manual:Slope Tool

Position of the slope triangle

For a line defined by points A and B (in this order) using Line through Two Points Tool or Line Command, the slope triangle is placed to point A. For line l defined using input line (entered as equation, e.g. l:x+2y=3), the triangle is placed at the y-intercept.

If you want to place the triangle elsewhere, you can follow these instructions.

1 select Line through Two Points Tool, click the line l in two points to create points C and D; new line will be created at the same time

2 use Slope Tool on the newly created line

3 hide point D

4 move C to adjust position of the slope triangle

bs:Nagib Alat ca:Eina Pendent cs:Nástroj Spád da:Hældning værktøj de:Steigung (Werkzeug) es:Herramienta de Pendiente et:Tõus tööriist fa:شیب ابزار fr:Outil Pente hr:Nagib alat it:Strumento Pendenza kk:Бұрыштық коэффициент құралы ko:기울기 도구 lt:Posvyris įrankis mk:Наклон Алатка pl:Nachylenie Narzędzie sk:Smernica nástroj tr:Eğim Araç zh:計算斜率 工具

© 2020 International GeoGebra Institute