Difference between revisions of "Comments:Slope Tool"
From GeoGebra Manual
m (Text replace - "[[nb:" to "[[no:") |
m (Updated tool names) |
||
Line 1: | Line 1: | ||
− | |||
==Position of the slope triangle== | ==Position of the slope triangle== | ||
− | For a line defined by points ''A'' and ''B'' (in this order) using [[Line | + | For a line defined by points ''A'' and ''B'' (in this order) using [[Line Tool]] or [[Line Command]], the slope triangle is placed to point ''A''. For line ''l'' defined using input line (entered as equation, e.g. <code>l:x+2y=3</code>), the triangle is placed at the y-intercept (point on ''l'' with zero x-coordinate). |
− | |||
If you want to place the triangle elsewhere, you can follow these instructions. | If you want to place the triangle elsewhere, you can follow these instructions. | ||
− | + | {{step|num=1}}select [[Line Tool]], click the line ''l'' in two points to create points ''C'' and ''D''; new line will be created at the same time | |
− | {{step|num=1}}select [[Line | ||
− | |||
{{step|num=2}}use ''Slope Tool'' on the newly created line | {{step|num=2}}use ''Slope Tool'' on the newly created line | ||
− | |||
{{step|num=3}}hide point ''D'' | {{step|num=3}}hide point ''D'' | ||
− | |||
{{step|num=4}}move ''C'' to adjust position of the slope triangle | {{step|num=4}}move ''C'' to adjust position of the slope triangle | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− |
Revision as of 23:48, 26 November 2013
Position of the slope triangle
For a line defined by points A and B (in this order) using Line Tool or Line Command, the slope triangle is placed to point A. For line l defined using input line (entered as equation, e.g. l:x+2y=3
), the triangle is placed at the y-intercept (point on l with zero x-coordinate).
If you want to place the triangle elsewhere, you can follow these instructions.
1 select Line Tool, click the line l in two points to create points C and D; new line will be created at the same time
2 use Slope Tool on the newly created line
3 hide point D
4 move C to adjust position of the slope triangle