Difference between revisions of "Comments:Slope Tool"

From GeoGebra Manual
Jump to: navigation, search
m (r2.7.3rc2) (Robot: Adding nn:Stigning Verktøy)
m (Position of the slope triangle)
 
(7 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<!-- DO NOT EDIT -->{{:Manual:{{PAGENAME}}}}<!-- END: DO NOT EDIT -->
 
 
==Position of the slope triangle==
 
==Position of the slope triangle==
For a line defined by points ''A'' and ''B'' (in this order) using [[Line through Two Points Tool]] or [[Line Command]], the slope triangle is placed to point ''A''. For line ''l'' defined using input line (entered as equation, e.g. <code>l:x+2y=3</code>), the triangle is placed at the y-intercept (point on ''l'' with zero x-coordinate).
+
For a line defined by points ''A'' and ''B'' (in this order) using [[File:Mode join.svg|link=|24px]] [[Line Tool]] or [[Line Command]], the slope triangle is placed to point ''A''. For line ''l'' defined using input line (entered as equation, e.g. <code>l:x+2y=3</code>), the triangle is placed at the y-intercept (point on ''l'' with zero x-coordinate).
 
+
If you want to place the triangle elsewhere, you can follow these instructions.<br><br/>
If you want to place the triangle elsewhere, you can follow these instructions.
+
{{step|num=1}}select [[File:Mode join.svg|link=|24px]] [[Line Tool]], click the line ''l'' in two points to create points ''C'' and ''D''; new line will be created at the same time<br/>
 
+
{{step|num=2}}use [[File:Mode slope.svg|link=|24px]]''Slope Tool'' on  the newly created line <br/>
{{step|num=1}}select [[Line through Two Points Tool]], click the line ''l'' in two points to create points ''C'' and ''D''; new line will be created at the same time
+
{{step|num=3}}hide point ''D'' <br/>
 
 
{{step|num=2}}use ''Slope Tool'' on  the newly created line
 
 
 
{{step|num=3}}hide point ''D''
 
 
 
 
{{step|num=4}}move ''C'' to adjust position of the slope triangle
 
{{step|num=4}}move ''C'' to adjust position of the slope triangle
 
[[bs:Nagib Alat]]
 
[[ca:Eina Pendent]]
 
[[cs:Nástroj Spád]]
 
[[da:Hældning værktøj]]
 
[[de:Steigung (Werkzeug)]]
 
[[es:Herramienta de Pendiente]]
 
[[et:Tõus tööriist]]
 
[[fa:شیب ابزار]]
 
[[fr:Outil Pente]]
 
[[hr:Nagib alat]]
 
[[it:Strumento Pendenza]]
 
[[kk:Бұрыштық коэффициент құралы]]
 
[[ko:기울기 도구]]
 
[[lt:Posvyris įrankis]]
 
[[mk:Наклон Алатка]]
 
[[nn:Stigning Verktøy]]
 
[[pl:Nachylenie Narzędzie]]
 
[[sk:Smernica nástroj]]
 
[[tr:Eğim Araç]]
 
[[zh:計算斜率 工具]]
 

Latest revision as of 09:29, 11 August 2015

Position of the slope triangle

For a line defined by points A and B (in this order) using Mode join.svg Line Tool or Line Command, the slope triangle is placed to point A. For line l defined using input line (entered as equation, e.g. l:x+2y=3), the triangle is placed at the y-intercept (point on l with zero x-coordinate). If you want to place the triangle elsewhere, you can follow these instructions.

1 select Mode join.svg Line Tool, click the line l in two points to create points C and D; new line will be created at the same time
2 use Mode slope.svgSlope Tool on the newly created line
3 hide point D
4 move C to adjust position of the slope triangle

© 2021 International GeoGebra Institute